Product Category
Feature Product
YDQ series metal baler is "Front Push-Out" Type. The bale is pushed out through the front gate. It is a two-stage compression metal baler.
Consulting
YDT series metal baler is "Side Push-Out" Type. The bale is pushed out through the side gate.
Consulting
YDS series metal baler has two main cylinders. It doesn't have a bale discharge system. The bale is usually taken out from the press chamber by grapples.
Consulting
YDF series metal baler is "Side Turn-Out" Type. The bale is discharged by a rotated flip board.
Consulting
YDS-QF series metal baler has two main cylinders. The bale is discharged by a rotated flip board from the front.
Consulting
YDT-PTZ Series Continuous Metal Baler
Two-stage compression metal baler. Automatic continous working. High output capacity.
Consulting
Our main products are as follows, namely, hydraulic metal briquetting press, hydraulic metal baler and hydraulic metal scrap shear.
Quick links
Copyright©2024 Jiangyin Metallurgy Hydraulic Machinery Factory